CTR formula: how to calculate click-through rate
The CTR formula is simple: divide clicks by impressions, then multiply by 100. Google Ads Help defines click-through rate as the clicks your ad receives divided by the number of times it is shown. The calculator above uses the same formula and shows it with your own numbers.
Worked example in $
- Clicks: 600. Impressions: 48,000.
- 600 ÷ 48,000 = 0.0125
- 0.0125 × 100 = 1.25%
Worked example in ₹ (Indian number format)
- Clicks: 1,500. Impressions: 1,20,000.
- 1,500 ÷ 1,20,000 = 0.0125
- 0.0125 × 100 = 1.25%
Ratio or percentage?
Google writes the formula as clicks ÷ impressions and shows the answer as a percentage. If you skip the × 100 step, you get 0.0125 instead of 1.25%. Both mean the same thing, but mixing them in one report causes confusion. Pick the percentage and use it everywhere.
CTR meaning: what click-through rate tells you
The plain CTR meaning is this: out of every 100 times your ad or link was shown, how many times did someone click it? A 1.25% CTR means about 1 or 2 clicks for every 100 views.
Many people find it easier to think in thousands. Multiply CTR by 10 to get clicks per 1,000 impressions. So 1.25% equals 12.5 clicks per 1,000 views. The tool shows this number next to your CTR.
What CTR measures
- How well your creative, headline and offer earn a click from the people who saw it.
- How well your targeting matches the audience to the message.
What CTR does not measure
- Sales, profit or return on ad spend.
- People who saw the ad and visited later without clicking.
One common error: an impression is a time the ad was shown. It is not a person, and it is not a click. If you count clicks inside impressions, your CTR will be wrong.
What is CTR in Google Ads, Meta Ads and Search Console?
What is CTR on each platform? The idea stays the same, but each platform counts clicks a little differently.
| Platform | Clicks counted | Divided by |
|---|---|---|
| Google Ads | Clicks on the ad | Impressions |
| Meta, CTR (link) | Link clicks | Impressions |
| Meta, CTR (all) | All clicks, including likes, comments and profile taps | Impressions |
| Meta, unique CTR | Unique link clicks (people) | Reach |
| Search Console | Organic clicks to your site | Times your site appeared in results |
| Clicks | Delivered emails |
Meta: use link clicks
Meta Business Help defines CTR (link click-through rate) as link clicks divided by impressions. Clicks (all) also counts reactions, comments, shares and photo expands, so CTR (all) is always at least as high as link CTR. To calculate CTR for Facebook ads, use link clicks. The tool reminds Meta users of this.
Google Ads
In Google Ads, CTR also feeds expected CTR, which is one part of Ad Rank. So a better CTR can help your ads, not just your report.
Search Console
Search Console Help defines CTR as click count divided by impression count, for organic results only. If your Search Console CTR is dropping while rankings hold, AI Overviews may be the cause. Ahrefs found an AI Overview links to a 58% lower CTR for the top-ranking page (December 2025 data).
Email CTR uses delivered emails. Click-to-open rate uses opens. They are different metrics, so do not compare them.
What is a good CTR? Benchmarks by placement
There is no single good CTR. Google itself says a good CTR depends on what you advertise and which network you use. A search ad shows up when someone is already looking, so it gets far more clicks than a banner on a news site.
These are the working ranges ScaleWin uses for the verdict in the calculator above:
| Where the ad ran | Low | Fine | Strong |
|---|---|---|---|
| Meta (link CTR) | Below 0.9% | 0.9% to 1.5% | Above 1.5% |
| Google Search | Below 3% | 3% to 6% | Above 6% |
| Display and YouTube | Below 0.3% | 0.3% to 0.6% | Above 0.6% |
Where the numbers come from
For search, WordStream's 2025 benchmarks put the median search CTR at 6.66% across 16,446 US campaigns, so 6% is a strong bar. Older WordStream data cited by Store Growers shows search at 3.17% and display at 0.46%. In that data, display CTR was about one-seventh of search CTR.
For Meta, we did not find a reliable public benchmark, including one for D2C brands in India. The 0.9% to 1.5% band is our working range, not an industry statistic. Your own past results are the best benchmark.
So is a 2% CTR good? On Meta, yes, that is strong. On Google Search, it is low. On Display, it is very high.
CTR calculator: how to use the tool above
The CTR calculator shows a result with example numbers as soon as the page loads, then updates as you type.
- Enter clicks and impressions. You can paste numbers with commas straight from your ad report.
- Choose where the ad ran: Meta, Google Search, or Display and YouTube. You get a one-line verdict based on the ranges above.
- On Meta, use the Link clicks column, not Clicks (all).
- Add ad spend if you want CPC and CPM.
- Use the target CTR field, which is open by default, to see the clicks you need.
- Pick a currency chip: ₹ INR, $ USD, £ GBP or € EUR. With ₹, numbers use Indian grouping, like 1,20,000.
- Use Copy link to share your inputs with a team or agency, or Save as PDF for a report.
Messages you might see
- No clicks yet: clicks are 0. Check that the link works, that the ad actually delivered, and that you copied the right column.
- Clicks higher than impressions: this cannot happen in one report. You probably copied the wrong column or mixed date ranges.
- Target must be between 0 and 100%: the target CTR is out of range.
The tool runs fully in your browser. Your numbers are not sent anywhere.
How the CTR formula connects to CPC and CPM
CTR matters because it changes what you pay for each visitor. Three formulas link them.
The first comes from Google's average CPC definition. The third follows from the first two. It shows that if your CPM stays the same and your CTR doubles, your CPC halves.
Example in ₹ (Meta, India)
- Spend ₹1,50,000. Impressions 6,00,000. Link clicks 7,500.
- CTR = 7,500 ÷ 6,00,000 × 100 = 1.25%
- CPC = ₹1,50,000 ÷ 7,500 = ₹20
- CPM = ₹1,50,000 ÷ 6,00,000 × 1,000 = ₹250
- Check: ₹250 ÷ (1.25 × 10) = ₹20
Example in £
At a £8 CPM, a 1% CTR gives a CPC of £8 ÷ 10 = £0.80. Lift CTR to 2% and the CPC drops to £8 ÷ 20 = £0.40. Same reach, half the cost per visitor.
One market note: in India, GST appears on ad invoices, and in the UK and Gulf, VAT may apply. Decide whether your spend figure includes tax and keep it the same every time, or your CPC trends will mislead you. For CPM on its own, try the CPM Calculator.
How many clicks do you need to hit a target CTR?
Work backwards from the CTR you want. This is what the target field in the calculator does.
- Extra clicks = clicks needed − current clicks
- New CPC on the same budget = spend ÷ clicks needed
Example with the default numbers
You have 48,000 impressions and 600 clicks (1.25%). For the default 2% target: 48,000 × 2 ÷ 100 = 960 clicks. That is 360 more clicks than today.
Example in $ (Google Search)
- Spend $2,000. Impressions 40,000. Clicks 1,600. CTR = 4%. CPC = $1.25.
- Target 6%: 40,000 × 6 ÷ 100 = 2,400 clicks.
- Extra clicks: 2,400 − 1,600 = 800.
- New CPC: $2,000 ÷ 2,400 = about $0.83.
Example in ₹
Using the Meta example above, a 1.5% target on 6,00,000 impressions needs 9,000 clicks, or 1,500 more. On the same ₹1,50,000, CPC falls from ₹20 to about ₹16.67.
The target must be between 0 and 100%. A 100% CTR would mean every single view became a click.
CTR formula in Excel or Google Sheets
To use the CTR formula in a spreadsheet, put clicks in column B and impressions in column C.
- In D2, type =B2/C2.
- Format column D as a percentage. 0.0125 will show as 1.25%.
- To avoid a #DIV/0! error when impressions are blank or 0, use =IFERROR(B2/C2,"").
If you prefer a plain number, use =B2/C2*100 and leave the format as a number. Just do not apply percentage formatting on top, or 1.25 will show as 125%.
Common CTR mistakes that skew your numbers
1. Averaging CTRs
To calculate combined CTR across campaigns, add up all clicks and all impressions first. Never average the CTRs.
| Ad | Clicks | Impressions | CTR |
|---|---|---|---|
| Ad A | 300 | 10,000 | 3% |
| Ad B | 100 | 40,000 | 0.25% |
| Total | 400 | 50,000 | 0.8% |
The simple average is 1.625%, which is about double the real 0.8%. The correct total is 400 ÷ 50,000 × 100 = 0.8%.
2. Reporting Meta CTR (all) as link CTR
CTR (all) includes likes and profile taps. It makes results look better than they are.
3. Comparing placements
A 1% CTR is strong on Meta but weak on Google Search. Compare like with like.
4. Mixing email CTR with click-to-open rate
One divides by delivered emails, the other by opens. The click-to-open number will usually look much higher.
5. Broken tracking
If CTR suddenly drops to 0 on Meta, confirm the ad is still delivering and has a working link. Pixel issues do not change CTR, but they do hide sales, so also check your pixel with the Facebook Pixel Checker.
CTR vs conversion rate: why clicks are not sales
CTR tells you how many people clicked. Conversion rate tells you how many of those clicks bought. A high CTR with a weak conversion rate often means the ad promised something the landing page did not deliver.
For D2C brands in India, there is one more step. With cash on delivery, an order is not money until it is delivered. High return-to-origin (RTO) rates can turn a great CTR into a loss. Track delivered orders, not just placed orders.
Before you scale an ad, check three numbers together: CTR, CPC and return on ad spend. You can check the last one with the ROAS Calculator. ScaleWin tracks CTR, CPC and profit for Meta and Google ads every day, so you can see which ads bring buyers, not just clicks.
How to improve a low CTR
Google Search
- Match the ad headline closely to the search term.
- Add sitelinks and other assets to take up more space.
- Add negative keywords so you stop showing for searches you cannot win.
Meta
- Change the hook in the first second of the video or the top of the image.
- Refresh creative when frequency rises and CTR starts to slide.
- Make the offer clear: price, discount or free delivery.
Display and YouTube
- Tighten audience targeting.
- Exclude placements that bring views but no clicks.
After each change, run the new numbers through the calculator above and compare CPC, not just CTR. For more guides on Meta and Google ads, see the ScaleWin blog.